Tensor ETV ST61-100-13 : Electric angle nutrunner - Atlas Copco USA

Products / not used / Electric angle nutrunner

Product Search

Tensor ETV ST61-100-13 : Electric angle nutrunner

8433 2039 02

Atlas Copco Tools and Assembly Systems LLC

800 859 3746

Send an email

Quick links

  • Brochures and catalogues

Atlas Copco’s unique Tensor motors give the Tensor range outstanding spindle speeds and, thus, help you achieve lower cycle times in your operation. Exceptional ergonomics in terms of balance, grip and low weight make the tools a favorite of the operators and increase individual productivity. All Tensor tools are equipped with LED’s that will indicate the tightening result, green light for tightening OK and red light for NOK. At Atlas Copco we believe that quality is the road to lowest cost of operation over time. A maintained Tensor tool produces the same performance year after year at minimum and predictable costs while ensuring highest possible uptime.
The second generation of Tensor tools, Tensor ST, also focusing on safety critical applications, was developed with low weight and productivity in mind.


Features & benefits

  • High speed nutrunner reduces tightening cycle times, thus increasing productivity
  • Improved ergonomics due its light weight for operator comfort
  • Internal bus connection for intelligent accessories, such as a barcode reader and torque selector, reducing time spent on unnecessary operator movements to read identifiers (e.g.: VIN) or pick up sockets to change program settings
  • Configurable LED’s and an integrated speaker for indicating results via audio signals for operator feedback, increasing assembly quality
  • Ergonomic motor sleeve improves grip and comfort for the operator

Technical data

Technical Specifications
Model typeAngle
Speed350 r/min
Weight5.5 lb
Torque range15 - 80 ft lb
Length502 mm
CS distance0.89 inch
Height60 mm
Motor power1200 W
Motor voltage200 Volt
Motor voltage type3 a.c.
Square drive1/2 inch
Sound standardISO15744
Sound pressure<70 dB(A)
Vibration standardISO28927-2
Vibration value<2.5 m/s²

Additional products for a complete tool system

Suitable cables - t0010
Tool cableOrdering No.
2 Meter4220 2636 02
3 Meter4220 2636 03
5 Meter4220 2636 05
7 Meter4220 2636 07
10 Meter4220 2636 10
15 Meter4220 2636 15
Cables with 90 degrees connectorOrdering No.
2 Meter4220 3891 02
3 Meter4220 3891 03
5 Meter4220 3891 05
7 Meter4220 3891 07
10 Meter4220 3891 10
15 Meter4221 3891 15
Spiral cable (length/stretched length)Ordering No.
3 M /4 M4220 2757 03
7 M/ 8 M4220 2757 07
10 M /12 M4220 2757 10
Cable protection4220 2977 90
Suitable controllers and software - t0023 
Controller CompactOrdering No.
PF 4000-C-CC-HW
PF 4000-C-DN-HW
PF 4000-C-EIP-HW
PF 4000-C-FLN-HW
PF 4000-C-HW
PF 4000-C-IB-HW
PF 4000-C-MB-HW
PF 4000-C-PB-HW
PF 4000-C-PN-HW
RBU for all Controller CompactOrdering No.
RBU-Bronze
RBU-Silver
RBU-Gold
Controller GraphOrdering No.
PF 4000-G-CC-HW
PF 4000-G-DN- HW
PF 4000-G-EIP-HW
PF 4000-G-FLN-HW
PF 4000-G-HW
PF 4000-G-IB-HW
PF 4000-G-MB-HW
PF 4000-G-PB-HW
PF 4000-G-PN-HW
RBU for all Controller GraphOrdering No.
RBU-Silver
RBU-Gold
Suitable software - t0052
ToolsTalk PF W10Ordering No.
1-user license8092 1190 01
5-user license8092 1190 05
10-user license8092 1190 10
Plant license8092 1190 99
ToolsTalk PF W07 upgrade to W10Ordering No.
1-user license8092 1190 31
5-user license8092 1190 35
10-user license8092 1190 40
Plant license8092 1190 49

Product views

Accessories

  • Nut - For complete kit order front part + holder

    Nut

    For complete kit order front part + holder

    4220 0848 01

  • Telescopic front part - For complete kit order holder + cap nut. Travel 25mm*

    Telescopic front part

    For complete kit order holder + cap nut. Travel 25mm*

    4220 1135 95

  • Extension for fixturing

    Extension for fixturing

    L=73 mm

    4220 2469 90

  • Covers for socket - M43x1Left. L = 46 mm

    Covers for socket

    M43x1Left. L = 46 mm. For standard sockets

    4220 3154 05

  • Supported extension

    Supported extension

    L = 147 mm

    4220 4125 91

  • Protective cover - For ETV ST61/81-40/50

    Protective cover

    For ETV ST61/81-40/50

    4220 2744 02

  • Suspension yoke - Fixed, attached on rear part of handle

    Suspension yoke

    Fixed, attached on rear part of handle. Handle assembly

    4220 1417 95

  • Protective cover

    Protective cover

    4220 2744 09

  • Tool cable - 2 meters

    Tool cable

    2 meters

    4220 2636 02

  • Tool cable - 3 meters

    Tool cable

    3 meters

    4220 2636 03

  • Tool cable - 5 meters

    Tool cable

    5 meters

    4220 2636 05

  • Tool cable - 7 meters

    Tool cable

    7 meters

    4220 2636 07

  • Tool cable - 10 meters

    Tool cable

    10 meters

    4220 2636 10

  • Tool cable - 15 meters

    Tool cable

    15 meters

    4220 2636 15

  • Suspension yoke - Fixed, attached on motor front nut

    Suspension yoke

    Fixed, attached on motor front nut. Motor front nut assembly

    4220 2843 91

  • Extended lever

    Extended lever

    4220 3511 85

  • Lock-off lever

    Lock-off lever

    4220 3511 83

  • Reverse ring

    Reverse ring

    8433 0618 50

  • Suspension yoke - Swiveling, For ETD/ETV ST31/61

    Suspension yoke

    Swiveling, For ETD/ETV ST31/61

    4220 2657 90

  • Safety trigger

    Safety trigger

    4220 3511 83

  • Holder - For complete kit order tel. front part + cap nut

    Holder

    For complete kit order tel. front part + cap nut

    4220 3555 90

  • Tool extension - L=150 mm

    Tool extension

    L=150 mm

    4220 2903 91

  • Reaction plate

    Reaction plate

    Reaction plate with reaction bar included

    4220 1677 97

  • Tool cable - 2 meters

    Tool cable

    2 meters

    4220 2636 02

  • Suspension yoke

    Suspension yoke

    Attached on motor

    4220 0987 90

  • Front button - Mounted on front part of motor

    Front button

    Mounted on front part of motor

    4220 3184 91

  • Dual trigger - Mounted on front part of motor with lever on top for dual trigger function

    Dual trigger

    Mounted on front part of motor with lever on top for dual trigger function

    4220 3186 91

  • Adjustable headlights - Mounted on front part of motor

    Adjustable headlights

    Mounted on front part of motor

    4220 3292 95

  • Dual trigger - Mounted on front part of motor with lever 135° from top for dual trigger function

    Dual trigger

    Mounted on front part of motor with lever 135° from top for dual trigger function

    4220 3311 91

  • Parameter set selector

    Parameter set selector

    8433 0615 15

  • Barcode scanner

    Barcode scanner

    8433 0615 20

  • I/O device module

    I/O device module

    8433 0617 22

  • Suspension yoke

    Suspension yoke

    Swivelling, attached on motor

    4220 2657 90

  • Suspension yoke - Fixed, attached on motor front nut

    Suspension yoke

    Fixed, attached on motor front nut

    4220 2843 92

  • Tool cable - 3 meters

    Tool cable

    3 meters

    4220 2636 03

  • Tool cable - 5 meters

    Tool cable

    5 meters

    4220 2636 05

  • Tool cable - 7 meters

    Tool cable

    7 meters

    4220 2636 07

  • Tool cable - 10 meters

    Tool cable

    10 meters

    4220 2636 10

  • Lock-off lever

    Lock-off lever

    4220 3511 83

  • Protection

    Protection

    4220 2917 06


You may also be interested in

Safety Information

To operate tools safely, always read and follow all Safety Information and Product Instructions. All locally legislated safety rules regarding installation, operation and maintenance must be respected at all times.

Safety Information
Product Instructions

Atlas Copco Tools and Assembly Systems LLC

800 859 3746

Send an email