EPP10 C90 HR13: Controlled, pneumatic, hydraulic pulse nutrunner - Atlas Copco USA

Product Search

Request information [-]

EPP10 C90 HR13: Controlled, pneumatic, hydraulic pulse nutrunner

8431 0380 62

Atlas Copco Tools and Assembly Systems LLC

800 859 3746

Send an email

Atlas Copco’s Pulsor C System gives you all the advantages of a controlled impulse tool, plus the intelligence of an electric fastening system. Like all Atlas Copco pulse tools, Pulsor C is fast, powerful, light and compact and generates virtually no reaction force. The controller remembers up to 4,000 tightenings that can be stored and analyzed. This enables you to fine-tune your process and ensure that every tightening in every shift is perfect. If they are not perfect, you can see why.


Features & benefits

  • No missed screws – Pulsor C counts the tightenings and signals “Batch OK”
  • Forget stripped screws – Pulsor C ensures the screw has been tightened correctly
  • No wrong/forgotten parts – Pulsor C signals “NOK” if the wrong screw or part is used
  • Correct torque every time – Pulsor C controls the torque level
  • Good repeatability – get consistent tightening on hard and soft joints
  • Premature trigger-release warning – LEDs warn operator of interrupted tightening
  • Multiple P-set – one tool can perform up to 100 different P-sets. The right torque setting is selected by exchanging sockets, scanning barcodes and more.
  • High-speed tightening – Atlas Copco pulse tools are fast and powerful, helping to boost productivity.
  • Easy to set up and use.
  • Hot swap – you can change the tool or cable without shutting the system down because the tool shut-off is located in the Tool Control Box instead of the tool. No new settings in the tool are needed.

Technical data

Technical Specifications
Bolt sizeM10 mm
Torque range33 - 66 ft lb
Square drive1/2 inch
Free speed5500 r/min
Weight4.5 lb
Length184 mm
CS distance1 5/32 inch
Air consumption under load23 cfm
Rec hose size10 inch
Air inlet thread-
Model typePistol
Shut-offYes
Max working pressure100 psi
Sound standardISO15744
Sound uncertainty3 dB(A)
Sound power94 dB(A)
Sound pressure83 dB(A)
Vibration standardISO28927-2
Vibration value3.3 m/s²
Vibration uncertainty0.9 m/s²

Included accessories with this product

  • Protective cover - For EPP10

    Protective cover

    For EPP10

    4250 2990 02

  • Suspension yoke

    Suspension yoke

    4250 1365 00

  • Trim valve Kit

    Trim valve Kit

    For North American market this is assembled on tool. All other markets as an Included accessory.

    4250 1894 80


Additional products for a complete tool system

Suitable controllers, tool control box and RBU - t0029
ControllerOrdering No. 
Pulsor Focus 4000-C-HW
Pulsor Focus 4000-C-DN-HW
Pulsor Focus 4000-C-PB-HW
Pulsor Focus 4000-C-PN-HW 
Pulsor Focus 4000-C-EIP-HW
Pulsor Focus 4000-C-IB-HW
Tool control box 
TCB-1E  (non US-market)
TCB-1U  (US-market)8433 0607 30
RBU - Hardware key 
Pulsor C - Gold  (non US-market)
Pulsor C - Gold  (US-market)8433 6020 05
Suitable cables - t0057
TCB cables  Ordering No.
Cable PF - TCB, 1.2 Metre4250 2901 01
Cable PF - TCB, 5 Metre4250 2901 05
Cable PF - TCB, 10 Metre4250 2901 10
Tool cables 
Straight 5 Metre4250 2533 05
Straight 12 Metre4250 2533 12
Spiral 5 Metre4250 2533 06 
Spiral 12 Metre4250 2533 13
Coil 3 Metre4250 2533 53
Coil 5 Metre4250 2533 55
Coil 7 Metre4250 2533 57

Spare parts lists, Dimensional drawings, Exploded Views, Service Instructions, etc.

Spare parts, Dimensional Drawings, Service Instructions, Industrial tools.
Below you find links to Atlas Copco ServAid application, where you find spare parts list and product instructions and a link to the Dimensional Drawing archive where you can find 2D and 3D drawings in PDF, DXF and IGS format.

Atlas Copco Service

The Leader in tool maintenance for industry Atlas Copco service is a proven cost-saver in your production. The savings you can expect from running a service program depend on the type of production you have in your plant. Many factors are taken into consideration, including: Line assembly, work at fixed stations, frequency of tool use, tool types, applications, and work environment.

Repair Service

With today’s high demands on minimizing downtime for our customers, we focus on specialized workshops that can handle quick repairs and complete overhauls in the most cost-efficient way. To do that we keep a large inventory of spare parts in stock, and we have upgraded with factory fixtures and test equipment to increase our efficiency. With all this, plus certified mechanics dedicated to specific tool models, we’ve minimized lead times and improved the quality of each repair. After service all tools are rigorously tested to Atlas Copco specifications.
Read more about Repair Service

Atlas Copco ToolScan

Tool service
Atlas Copco ToolScan™ report informs you of the status of your air tools and air supply at each workstation. The service is carried out by a highly experienced certified technician and covers the following areas:
  • AirScan of the air supply at each workstation.
  • Status and performance check of the tools
  • Other services can be added.
A report informing you of the status of your air supply and tools, including recommendations for improvements. You can then, together with your team, decide the next step without a binding agreement.
Read more about Atlas Copco ToolScan™


Energy Efficiency Audit

EEA
A huge amount of energy is wasted due to leaks in compressed air systems. Capacity losses of up to 20% are common in many installations. During an Energy Efficiency Audit Atlas Copco checks the static and dynamic pressure for your air tools on the line. The pressure drop is measured and documented and a visual inspection of the air installation is performed. Based on the information acquired, using the Energy Efficiency Calculator, Atlas Copco recommends the correct installation in terms of air line accessories and various other aspects.

Read more about Energy efficiency Audit

Calibration Service

Calibration in Service Lab
With our network of calibration laboratories we can offer a complete package of calibration services to help you control quality for all assembly tools and measurement equipment in your production.

Read more about Calibration services.

Preventive Maintenance

Like other machines, Atlas Copco industrial power tools need regular maintenance in order to fulfill their full potential in terms of performance and reliability. Different agreements are available, tailored to your needs. We offer maintenance both on-site or off-site, or a combination.

Read more about Preventive Maintenance



Full Coverage Service

Our Full Coverage option keeps your power tools in top operating condition and gives you a fixed budget for all tool maintenance. Other services can be added. To develop the optimum service program for your specific manufacturing operation, take advantage of our unique ToolScan RCM process.

Full Coverage includes:
  • Repair, including parts
  • Calibration
  • Preventive maintenance program
  • On-site/off-site options
  • Other services can be added
Read more about Full Coverage service

Outsourcing solutions

We have extensive experience of outsourcing solutions and currently have more than 75 on-site workshops. These are examples of the areas we cover:
  • Preventive maintenance, repair and calibration of all
    brands and types of tools.
  • Installation and start-up support.
  • Service management system, including developing Key Performance Indicators.
  • Line and process support.
  • Back-up tool/equipment and spare parts management.
  • Other customer requests.
Read more about Outsourcing Solutions

Product views


See the product in action

Accessories

  • Suspension yoke

    Suspension yoke

    4250 2720 00

  • Tool cable - Coil, 3 meters

    Tool cable

    Coil, 3 m

    4250 2533 53

  • Suspension yoke - for EPP10

    Suspension yoke

    for EPP10

    4250 2563 82

  • Air sensor tuning valve - See, Pulsor manual

    Valve

    See, Pulsor manual

    4080 1340 00

  • MultiFlex - Swivelling type, BSP

    MultiFlex

    Swivelling type, BSP

    8202 1350 20

  • Hose kit

    5 m

    8202 1180 78

  • Hose kit

    10 m

    8202 1180 36

  • Tool cable - Spiral, 5 m

    Tool cable

    Spiral, 5 m

    4250 2533 06

  • Tool cable - Spiral, 12 m

    Tool cable

    Spiral, 12 m

    4250 2533 13

  • Tool cable - Straight, 5 m

    Tool cable

    Straight, 5 m

    4250 2533 05

  • Tool cable - Straight, 12 m

    Tool cable

    Straight, 12 m

    4250 2533 12

  • Tool cable - Coil, 5 m

    Tool cable

    Coil, 5 m

    4250 2533 55

  • Tool cable - Coil, 7 m

    Tool cable

    Coil, 7 m

    4250 2533 57

Atlas Copco Tools and Assembly Systems LLC

800 859 3746

Send an email