Tensor ETP ST101-750-25 : Electric pistol grip nutrunner - Atlas Copco USA

Product Search

Request information [-]

Tensor ETP ST101-750-25 : Electric pistol grip nutrunner

8433 2307 51

Atlas Copco Tools and Assembly Systems LLC

800 859 3746

Send an email

Atlas Copco’s unique Tensor motors give the Tensor range outstanding spindle speeds and, thus, help you achieve lower cycle times in your operation. Exceptional ergonomics in terms of balance, grip and low weight make the tools a favorite of the operators and increase individual productivity. All Tensor tools are equipped with LED’s that will indicate the tightening result, green light for tightening OK and red light for NOK. At Atlas Copco we believe that quality is the road to lowest cost of operation over time. A maintained Tensor tool produces the same performance year after year at minimum and predictable costs while ensuring highest possible uptime.
The second generation of Tensor tools, Tensor ST, also focusing on safety critical applications, was developed with low weight and productivity in mind.


Features & benefits

  • High speed nutrunner reduces tightening cycle times, thus increasing productivity
  • Improved ergonomics due its light weight for operator comfort
  • Internal bus connection for intelligent accessories, such as a barcode reader and torque selector, reducing time on unnecessary operator movements to read identifiers (e.g.: VIN) or pick up sockets to change program settings
  • Configurable LED’s and an integrated speaker for indicating results via audio signals for operator feedback increasing assembly quality
  • Pistol grip tool fits both hand-held and fixtured application
  • Due its reduced length compared to a straight tool, it is well-suited for a more compact design on some fixtured applications where space is a limitation




  • Unique and patented 360° swivel with transducer for easy reaction bar positioning
  • Ultra-compact size improves accessibility in different applications where space is a restriction
  • Reduced weight means less need for fixtures and more operator comfort
  • Display on tool gives direct feedback to the operator to increase assembly quality

Technical data

Technical Specifications
Motor power1500 W
Motor voltage200 Volt
Motor voltage type3 a.c.
Torque range160 - 550 ft lb
Speed132 r/min
Weight12.8 lb
Length353 mm
CS distance1 5/16 inch
Spline/Mounting5
Model typePistol
Sound standardISO15744
Sound pressure<70 dB(A)
Vibration standardISO28927-2
Vibration value<2.5 m/s²

Included accessories with this product

  • Protective cover

    Protective cover

    4220 4299 00

  • Handle, compl.

    Handle, compl.

    4220 4001 83

  • Screw - MRT M6x16 T30. When using tool with fan use screw MRT M6x22 T30

    Screw

    MRT M6x16 T30. When using tool with fan use screw MRT M6x22 T30

    4220 4286 02


Additional products for a complete tool system

Suitable cables - t0010
Tool cableOrdering No.
2 Meter4220 2636 02
3 Meter4220 2636 03
5 Meter4220 2636 05
7 Meter4220 2636 07
10 Meter4220 2636 10
15 Meter4220 2636 15
Cables with 90 degrees connectorOrdering No.
2 Meter4220 3891 02
3 Meter4220 3891 03
5 Meter4220 3891 05
7 Meter4220 3891 07
10 Meter4220 3891 10
15 Meter4221 3891 15
Spiral cable (length/stretched length)Ordering No.
3 M /4 M4220 2757 03
7 M/ 8 M4220 2757 07
10 M /12 M4220 2757 10
Cable protection4220 2977 90
Suitable controllers and software - t0023 
Controller CompactOrdering No.
PF 4000-C-CC-HW
PF 4000-C-DN-HW
PF 4000-C-EIP-HW
PF 4000-C-FLN-HW
PF 4000-C-HW
PF 4000-C-IB-HW
PF 4000-C-MB-HW
PF 4000-C-PB-HW
PF 4000-C-PN-HW
RBU for all Controller CompactOrdering No.
RBU-Bronze
RBU-Silver
RBU-Gold
Controller GraphOrdering No.
PF 4000-G-CC-HW
PF 4000-G-DN- HW
PF 4000-G-EIP-HW
PF 4000-G-FLN-HW
PF 4000-G-HW
PF 4000-G-IB-HW
PF 4000-G-MB-HW
PF 4000-G-PB-HW
PF 4000-G-PN-HW
RBU for all Controller GraphOrdering No.
RBU-Silver
RBU-Gold
Suitable software - t0052
ToolsTalk PF W10Ordering No.
1-user license8092 1190 01
5-user license8092 1190 05
10-user license8092 1190 10
Plant license8092 1190 99
ToolsTalk PF W07 upgrade to W10Ordering No.
1-user license8092 1190 31
5-user license8092 1190 35
10-user license8092 1190 40
Plant license8092 1190 49

Spare parts lists, Dimensional drawings, Exploded Views, Service Instructions, etc.

Spare parts, Dimensional Drawings, Service Instructions, Industrial tools.
Below you find links to Atlas Copco ServAid application, where you find spare parts list and product instructions and a link to the Dimensional Drawing archive where you can find 2D and 3D drawings in PDF, DXF and IGS format.

Download your tool test certificate

A test certificate tells you that the tool has been tested and passed our requirements in the factory. This includes functional testing as well as accuracy testing.

Download certificate

Atlas Copco Service

The Leader in tool maintenance for industry Atlas Copco service is a proven cost-saver in your production. The savings you can expect from running a service program depend on the type of production you have in your plant. Many factors are taken into consideration, including: Line assembly, work at fixed stations, frequency of tool use, tool types, applications, and work environment.

Repair Service

With today’s high demands on minimizing downtime for our customers, we focus on specialized workshops that can handle quick repairs and complete overhauls in the most cost-efficient way. To do that we keep a large inventory of spare parts in stock, and we have upgraded with factory fixtures and test equipment to increase our efficiency. With all this, plus certified mechanics dedicated to specific tool models, we’ve minimized lead times and improved the quality of each repair. After service all tools are rigorously tested to Atlas Copco specifications.
Read more about Repair Service

Calibration Service

Calibration in Service Lab
With our network of calibration laboratories we can offer a complete package of calibration services to help you control quality for all assembly tools and measurement equipment in your production.

Read more about Calibration services.

Preventive Maintenance

Like other machines, Atlas Copco industrial power tools need regular maintenance in order to fulfill their full potential in terms of performance and reliability. Different agreements are available, tailored to your needs. We offer maintenance both on-site or off-site, or a combination.

Read more about Preventive Maintenance



Full Coverage Service

Our Full Coverage option keeps your power tools in top operating condition and gives you a fixed budget for all tool maintenance. Other services can be added. To develop the optimum service program for your specific manufacturing operation, take advantage of our unique ToolScan RCM process.

Full Coverage includes:
  • Repair, including parts
  • Calibration
  • Preventive maintenance program
  • On-site/off-site options
  • Other services can be added
Read more about Full Coverage service

Outsourcing solutions

We have extensive experience of outsourcing solutions and currently have more than 75 on-site workshops. These are examples of the areas we cover:
  • Preventive maintenance, repair and calibration of all
    brands and types of tools.
  • Installation and start-up support.
  • Service management system, including developing Key Performance Indicators.
  • Line and process support.
  • Back-up tool/equipment and spare parts management.
  • Other customer requests.
Read more about Outsourcing Solutions

Service packages for new equipment

Investing in new tools to upgrade an existing production line? Or perhaps you’re designing, installing and commissioning an entirely new line. In either case Atlas Copco’s specialists are there every step of the way to help you focus on quality and efficiency. With your production up and running our service programs will help keep you online with minimum interruptions.

Product views

Accessories

  • Suspension yoke - Swiveling

    Suspension yoke

    Swiveling

    4210 3088 87

  • Tool cable - 5 meters

    Tool cable

    5 m

    4220 2636 05

  • Tool cable - 7 meters

    Tool cable

    7 m

    4220 2636 07

  • Tool cable - 10 meters

    Tool cable

    10 m

    4220 2636 10

  • Tool cable - 15 meters

    Tool cable

    15 m

    4220 2636 15

  • Reaction bar, exdended sliding tube - Sliding Drive

    Reaction bar, exdended

    Exdended sliding drive. Spline type 5

    4210 4498 82

  • LTD Telescopict - 1” Square drive

    LTD Telescopict

    1” Square drive

    4210 3788 80

  • Tool cable - 5 metres

    Tool cable

    5 m

    4220 2636 05

  • Tool cable - 10 metres

    Tool cable

    10 m

    4220 2636 10

  • Tool cable - 15 metres

    Tool cable

    15 m

    4220 2636 15

  • Spiral cable - 7/8 metres

    Spiral cable

    7/8 metres

    4220 2757 10

  • Spiral cable - 10/12 metres

    Spiral cable

    10/12 metres

    4220 2757 07

  • Reaction bar, compl. - Sliding 1’’ square drive, spline type 5. CC distance 80-125 mm

    Reaction bar, sliding drive

    Sliding 1’’ square drive, spline type 5. CC distance 80-125 mm. Mounting: Mounted on the front gear splines. Designed to take reaction on adjacent bolt or material

    4210 4481 85

  • Suspension yoke, compl.

    Suspension yoke, compl.

    4220 4075 90

  • Scanner

    Scanner

    8433 0615 50

  • Reaction bar. - Spline type 5

    Reaction bar

    Spline type 5. For further information, please see Printed Matter No. 9836 1454 01.

    4210 2726 80

  • Suspension yoke

    Suspension yoke

    4220 4075 91

  • Fan, compl - Instructions for assembly of fan, see 9836 5302 00

    Fan, compl

    Instructions for assembly of fan, see 9836 5302 00

    4220 4417 90

  • Reaction bar, sliding drive - Sliding 1’’ square drive. CC distance 80-125 mm

    Reaction bar

    Sliding 1’’ square drive, spline type 5. CC distance 80-125 mm. Mounting: Mounted on the front gear splines. Designed to take reaction on adjacent bolt or material.

    4210 4481 85

  • Reaction bar, S-type - S-type

    Reaction bar, S-type

    S-type. Spline type 5. Mounting: Mounted on the front gear splines. Designed to take reaction on adjacent bolt or material

    4210 4480 05

  • Scanner protection

    Scanner protection

    4220 2762 10

  • Reaction bar, sliding drive - 1" square drive, CC82-218mm

    Reaction bar, sliding drive

    1" square drive, long. Spline type 5. CC82-218 mm. Mounting: Mounted on the front gear splines. Designed to fit on adjacent bolt with socket.

    4210 4616 85

  • Reaction bar, extended sliding drive - Extended, adjustable

    Reaction bar, extended

    Extended sliding drive, adjustable. Spline type 5. Mounting: Mounted on the front gear splines. Designed for wheel tightening

    4210 4498 80

  • Tool cable - 7 metres

    Tool cable

    7 m

    4220 2636 07

  • Trigger handle

    with button

    4220 4522 82

  • Reaction bar, square bracket

    Mounting: Mounted on front gear splines. Spline type 5. Can be welded to fit on existing fixture.

    4210 2726 01


You may also be interested in

Safety Information

To operate tools safely, always read and follow all Safety Information and Product Instructions. All locally legislated safety rules regarding installation, operation and maintenance must be respected at all times.

Safety Information
Product Instructions


Atlas Copco USA - Eco Design
Eco Design and environmental aspects of product development is nothing new to us. Atlas Copco has a history of developing modular tools with a deep respect for materials and natural resources used in the products. We always strive to maximize the functionality of the product and at the same time minimize the energy consumption to make sure the environmental impact is as low as possible. By developing accurate tools we make sure the customer never has to waste time or energy to re-do an operation. For battery tools we also have the option to connect multiple tools to one controller and thereby decrease the standby energy consumption considerably.

Eco Design is all about minimizing a product's environmental impact during its entire life-cycle, including extraction of raw materials, manufacturing, customer usage and recycling while maximizing the productivity.

Our approach to Eco Design

Eco Design
Within Industrial Technique we approach Eco Design from six different areas. These form the core of the Eco Design review performed in each product development project. This procedure helps define Eco Design targets early in the project.
  1. HAZARDOUS SUBSTANCES
    We avoid hazardous substances and materials listed on the Atlas Copco Restricted & Prohibited list.
  2. MATERIALS
    We use materials and structural features to minimize the product’s weight and invest in strong, durable materials to protect the product.
  3. MIX AND MODULARITY
    We avoid mixing materials since blends inhibit recycling and consider fastening methods to facilitate disassembly.
  4. ENERGY
    We consider how the final product will be used in order to minimize energy and resource consumption in the use phase, in production and during transportation.
  5. REUSE AND RECYCLING
    We design with recycling in mind. We promote repair and upgrading, especially for long lasting and system-dependent products. To increase the customer’s awareness regarding the importance of recycling, we are now including Recycling Instructions in the Product Information (PI).
  6. INFORMATION CUSTOMER
    We prepare for upgrading, maintenance and recycling, through labelling, modularization and information in the product information.
This is how we do Sustainable Productivity in practice!

Atlas Copco Tools and Assembly Systems LLC

800 859 3746

Send an email